Call now to get tree service including tree clear, tree drop, bush delimbing, shrub chop, stump chopping and bunch more within USA:


Click to call

Call us now +1 (855) 280-15-30






After drilling the bushing sleeves to a depth of 2.

Separating the swing arm (and removing the silent bloc) The swing arm on an old A10 does not come apart easily. It is held together by the swinging arm fork spindlerunning through the center of the swing arm.

This spindle is held in place by a securing bolt on one end and a nut on the opposite end. Align the shaft to pass through the swingarm and engine cradle. Insert the 1⁄2 diameter bolt to help align the shaft and rotate to get the small cross bolt to line up.

Joined: Aug

After installing the cross bolt, check that the swingarm rotates freely. Install the outer endcap with a new o‐ring using the long screw. A 1⁄4‐20UNC set screw can be Estimated Reading Time: 4 mins. Describes one method for removing and installing swing arm bushings. This technique can also be used for other applications, such as steering stem/head bear.

Jun 15, BSA Chains BSA Ignition settings BSA Torque settings Fasteners. Sponsoring B44 Swingarm Bushing Removal # 06/05/06 pm. Joined: Aug Posts: 2, Likes: 1. SLO County, CA. D. Dec 15, Removing the BSA A10 swing arm and silent block bushings.

Share Post on Facebook.

after a few minutes I pulled the inner metal portion of the bushing out with some vice grips. I repeated this to the second side.

triumph t bonneville (1) BSA Thunderbolt (53) Hodaka Ace Restoration (4) Honda CB Clubman (3)Estimated Reading Time: 3 mins.