Apr 19, Dismantling. Remove the worn out bushings from the frontal and rear lugs of the leaf spring and from the car’s frame brackets by any suitable way. Clean the bearings in leaf spring’s lugs and the bearings in the frame brackets from rust and dirt. Rate the degree of wear and damage of the fixing elements to the car’s frame.
Replace if. Oct 15, Keep the jack under the rear end. Do one end of a single spring at a time, removing the bolt securing the spring into the front pocket and/or the leaf spring and frame bolts on the rear shackle as required. This keeps the rear end properly located. 3. Remove the bolt and lower the jack completely to perform the repair described below. Dec 18, I'm about to replace my rear leave spring bushings and can not unscrew the holding screws to allow the springs to open up.
Can I press out the old bushings and replace them without removing these slotted screws? Any ideas on the best way to remove the slotted screws without stripping the.
Nov 23, 4, Posts. #4 Nov 20, Re: moving Leaf Spring Bushings. I used some threaded rod, large washers and some short sections of pipe to pull the bushings out. I used a couple of chisels driven into the gap where the spring wraps around the bushing.
This reduced the tension on the bushing and made it far easier. Mack Leaf Spring Bushings are sold individually. You can give us a call regarding the bushings that you need for you leaf springs. Part No. O.D. (A) I.D. (B) Length (C) MB 1 1/2: 1 1/4: 2 11/ MB 1 1/2: 1 1/4: 3 3/ Harris Bushings.
Replace worn harris bushings with these standard rubber replacements.
These bushings are inserted by. Product description. The OTC A Truck Front Leaf Spring, Pin and Bushing Service Set delivers 10 tons of hydraulic force to remove and install truck front spring eye bushing assemblies quickly and easily. Services bushings with diameters from /4 inch through /8 inch and pin diameters from 7/8 inch through /8 treecut.buzzs: Feb 27, Removing eye bushings from leaf springs. Discussion in 'The Hokey Ass Message Board' started by 56 ford custom, Feb 25, Joined: Aug 22, Well fellas I have broughtone side to work to see if one of the techs can remove the old and press in stump removal barrie, 1930 Gloucester MA new.
I will keep you all posted 56 ford custom, Feb 27, May 06, In this video, I show how to remove leaf spring bushings using common tools. No need to purchase an expensive shop press or risk using a torch.
Be Sure to Checkout the Gettin Junk Done Stores!